Two towers are filled with adsorbent materials. They are designed to retain H2O molecules by physical sieving. H2O molecules held by the adsorbent material can easily be released by molecular forces. As the first tower dries moist air, the second tower will be regenerated with back-draft air. This is a physical reaction and can be repeated indefinitely.

+3°C Dewpoint is not enough for radar systems, nuclear plants, space research, super dry conductivity and similar fields. These sectors require Pressure dew point to be -70°C which can be reached with AKDAC Series Adsorption Air Dryers.

Until 7 m³/min capacity;
Inlet: Water separator and 1 micron filters, Outlet: 0,1 micron filters are included.

Automatic Dew-Point Sensor is Optional.

TECHNICAL SPECIFICATIONS

Correction Factors for Different Inlet Pressures
Bar	4	5	6	7	8	9	10
Fc: P	0.6	0.74	0.86	1	1.1	1.2	1.3
Correction Factors for Different Inlet Temperatures
°C	25	30	35	40	45	50
Fc: T	1.1	1.05	1	0.9	0.7	0.6

Power	230-1-50  V/Ph/Hz  - 50W
Nominal Inlet Air Temperature	35°C
Regeneration Air Loss	7/15 %
Pressure Dew Point (7 bar)	-70 °C
Work / Regeneration Cycles	5 dk/5 dk
Electrical Protection Class	IP55

Two towers are filled with adsorbent materials. They are designed to retain H2O molecules by physical sieving. H2O molecules held by the adsorbent material can easily be released by molecular forces. As the first tower dries moist air, the second tower will be regenerated with back-draft air. This is a physical reaction and can be repeated indefinitely.

+3°C Dewpoint is not enough for medical, pharmaceutical, electronics, smelting, cosmetics and coating sectors. These sectors require Pressure dew point to be -40°C which can be reached with AKDAB Series Adsorption Air Dryers.

Until 7 m3/min capacity;
Inlet: Water separator and 1 micron filters, Outlet: 0,1 micron filters are included.

Automatic Dew-Point Sensor is Optional.


TECHNICAL SPECIFICATIONS

Correction Factors for Different Inlet Pressures
Bar	4	5	6	7	8	9	10
Fc: P	0.6	0.74	0.86	1	1.1	1.2	1.3
Correction Factors for Different Inlet Temperatures
°C	25	30	35	40	45	50
Fc: T	1.1	1.05	1	0.9	0.7	0.6

Power	230-1-50 V/Ph/Hz - 50W
Nominal Inlet Air Temperature	35°C
Regeneration Air Loss	7/15 %
Pressure Dew Point (7 bar)	-40 °C
Work/ Regeneration Cycles	5 dk/5 dk
Electrical Protection Class	IP55

Two towers are filled with adsorbent materials. They are designed to retain H2O molecules by physical sieving. H2O molecules held by the adsorbent material can easily be released by molecular forces. As the first tower dries moist air, the second tower will be regenerated with back-draft air. This is a physical reaction and can be repeated indefinitely.

+3°C Dewpoint is not enough for medical, pharmaceutical, electronics, smelting, cosmetics and coating sectors. These sectors require Pressure dew point to be -20°C which can be reached with AKDAB 20C Series Adsorption Air Dryers.

Until 7 m3/min capacity;
Inlet: Water separator and 1 micron filters, Outlet: 0,1 micron filters are included.

Automatic Dew-Point Sensor is Optional.


TECHNICAL SPECIFICATIONS

Correction Factors for Different Inlet Pressures
Bar	4	5	6	7	8	9	10
Fc: P	0.6	0.74	0.86	1	1.1	1.2	1.3
Correction Factors for Different Inlet Temperatures
°C	25	30	35	40	45	50
Fc: T	1.1	1.05	1	0.9	0.7	0.6

Power	230-1-50 V/Ph/Hz - 50W
Nominal Inlet Air Temperature	35°C
Regeneration Air Loss	7/15 %
Pressure Dew Point (7 bar)	-20 °C
Work / Regeneration Cycles	5 dk/5 dk
Electrical Protection Class	IP55

Two towers are filled with adsorbent materials. They are designed to retain H2O molecules by physical sieving. H2O molecules held by the adsorbent material can easily be released by molecular forces. As the first tower dries moist air, the second tower will be regenerated with back-draft air. This is a physical reaction and can be repeated indefinitely.

+3°C Dewpoint is not enough for radar systems, nuclear plants, space research, super dry conductivity and similar fields. These sectors require Pressure dew point to be -70°C which can be reached with AKDAC Series Adsorption Air Dryers.

Until 7 m³/min capacity;
Inlet: Water separator and 1 micron filters, Outlet: 0,1 micron filters are included.

Automatic Dew-Point Sensor is Optional.

TECHNICAL SPECIFICATIONS

Correction Factors for Different Inlet Pressures
Bar	4	5	6	7	8	9	10
Fc: P	0.6	0.74	0.86	1	1.1	1.2	1.3
Correction Factors for Different Inlet Temperatures
°C	25	30	35	40	45	50
Fc: T	1.1	1.05	1	0.9	0.7	0.6

Power	230-1-50  V/Ph/Hz  - 50W
Nominal Inlet Air Temperature	35°C
Regeneration Air Loss	7/15 %
Pressure Dew Point (7 bar)	-70 °C
Work / Regeneration Cycles	5 dk/5 dk
Electrical Protection Class	IP55

Two towers are filled with adsorbent materials. They are designed to retain H2O molecules by physical sieving. H2O molecules held by the adsorbent material can easily be released by molecular forces. As the first tower dries moist air, the second tower will be regenerated with back-draft air. This is a physical reaction and can be repeated indefinitely.

+3°C Dewpoint is not enough for medical, pharmaceutical, electronics, smelting, cosmetics and coating sectors. These sectors require Pressure dew point to be -40°C which can be reached with AKDAB Series Adsorption Air Dryers.

Until 7 m3/min capacity;
Inlet: Water separator and 1 micron filters, Outlet: 0,1 micron filters are included.

Automatic Dew-Point Sensor is Optional.


TECHNICAL SPECIFICATIONS

Correction Factors for Different Inlet Pressures
Bar	4	5	6	7	8	9	10
Fc: P	0.6	0.74	0.86	1	1.1	1.2	1.3
Correction Factors for Different Inlet Temperatures
°C	25	30	35	40	45	50
Fc: T	1.1	1.05	1	0.9	0.7	0.6

Power	230-1-50 V/Ph/Hz - 50W
Nominal Inlet Air Temperature	35°C
Regeneration Air Loss	7/15 %
Pressure Dew Point (7 bar)	-40 °C
Work/ Regeneration Cycles	5 dk/5 dk
Electrical Protection Class	IP55

Two towers are filled with adsorbent materials. They are designed to retain H2O molecules by physical sieving. H2O molecules held by the adsorbent material can easily be released by molecular forces. As the first tower dries moist air, the second tower will be regenerated with back-draft air. This is a physical reaction and can be repeated indefinitely.

+3°C Dewpoint is not enough for medical, pharmaceutical, electronics, smelting, cosmetics and coating sectors. These sectors require Pressure dew point to be -20°C which can be reached with AKDAB 20C Series Adsorption Air Dryers.

Until 7 m3/min capacity;
Inlet: Water separator and 1 micron filters, Outlet: 0,1 micron filters are included.

Automatic Dew-Point Sensor is Optional.


TECHNICAL SPECIFICATIONS

Correction Factors for Different Inlet Pressures
Bar	4	5	6	7	8	9	10
Fc: P	0.6	0.74	0.86	1	1.1	1.2	1.3
Correction Factors for Different Inlet Temperatures
°C	25	30	35	40	45	50
Fc: T	1.1	1.05	1	0.9	0.7	0.6

Power	230-1-50 V/Ph/Hz - 50W
Nominal Inlet Air Temperature	35°C
Regeneration Air Loss	7/15 %
Pressure Dew Point (7 bar)	-20 °C
Work / Regeneration Cycles	5 dk/5 dk
Electrical Protection Class	IP55